21+ ONLY · Age-restricted products. Independent age verification required.
Free delivery may be available on eligible UK orders of £30+Shipping eligibility and charges are confirmed at checkout.

November 15, 2026

How to Change a Vape Coil: Step-by-Step Guide

Innokin Go Z Tank [Black]-0

Knowing how to change a vape coil is one of the most useful skills you can learn with a refillable kit. A fresh coil brings back flavour, fixes many burnt or weak hits and usually takes less than five minutes. This guide walks through the whole job step by step, whether you use a pod kit with a removable coil or a traditional tank, plus the small mistakes that cause leaks and dry hits afterwards.

When Should You Replace a Vape Coil?

Coils wear out gradually as the wick soaks up sweeteners and the wire builds up residue. The usual signs are a muted or “off” taste, a harsh or burnt hit, gurgling that won’t clear, or a darkened wick you can see through the tank. How quickly this happens depends on your e-liquid, wattage and how much you vape. Our guide on how often to change your vape coil covers typical lifespans in more detail.

Before you start, check that the replacement coil is the right model and resistance for your tank or pod. Coils are not universal: the brand and series printed on the coil and its box need to match what your device accepts. The safest place to confirm this is your device’s manual or packaging.

What You Need Before Changing a Vape Coil

  • A compatible replacement coil in the resistance you prefer
  • Your usual e-liquid for refilling and priming
  • Kitchen roll or a clean cloth for drips
  • A clean, flat surface away from children and pets

Coils are usually sold in multipacks, such as these Innokin Z Coils in 0.8ohm, which the product listing describes as replacements for the Innokin Zenith, Zlide and Z-BIIP ranges. You can browse other makes and resistances in our replacement vape coils range.

How to Change a Vape Coil in a Tank: Step by Step

Most tanks follow the same basic pattern. Exact designs vary, so use these steps alongside your manufacturer’s instructions.

  1. Switch the device off. Lock it or turn it off so it can’t fire while you handle the coil.
  2. Remove the tank from the battery. Unscrew it from the mod or pull the pod out of the device.
  3. Empty or nearly empty the tank. Changing a coil is far less messy with little or no e-liquid left. Tip any remaining liquid out carefully or vape it down first.
  4. Take out the old coil. Depending on the tank, this means unscrewing the base, pulling the coil straight down, or removing it from the top. Let it cool if you’ve just been vaping, as it can be hot.
  5. Wipe the tank. Use kitchen roll to clear residue from the chimney and base. Check that the seals and O-rings are seated properly.
  6. Prime the new coil. Drip a few drops of e-liquid onto the exposed cotton through the side holes and into the top centre of the coil.
  7. Fit the new coil. Push or screw it in firmly but without forcing it. A cross-threaded coil is a common cause of leaks.
  8. Refill and reassemble. Fill the tank, close it and reattach it to your device.
  9. Wait before vaping. Leave it for five to ten minutes so the wick can fully saturate.

The Innokin Go Z Tank is a good example of a tank designed with easy coil changes in mind. Its listing describes a refillable 2ml tank with sliding top-fill, a streamlined coil replacement design and adjustable airflow, and it comes with a 1.6ohm Z-Coil.

Innokin Go Z refillable 2ml vape tank in black with sliding top fill

Why Priming Matters

Skipping the priming step is the most common reason a brand-new coil tastes burnt on the first puff. Dry cotton scorches almost instantly and the damage can’t be undone. Our full guide on how to prime a vape coil explains the technique for different coil types.

Changing the Coil in a Pod Kit

Many pod kits use removable coils rather than coils built into the pod. The process is similar, just smaller: pull the pod out, empty it, pull the old coil from the base (some designs push in from below, others from the top), prime the new one, push it in until it seats, refill and wait.

Mesh coils for pod-style devices, such as the Smok Nord 0.6 ohm mesh coils, are changed in exactly the same way. If you’re not sure whether mesh or a standard wire coil suits you, see our comparison of mesh vs regular coils.

Smok Nord 0.6 ohm mesh replacement coils five-pack for pod kits

If your pod has the coil built in, there’s nothing to swap: you replace the whole pod instead. Check your kit’s manual if you’re unsure which type you have.

Common Mistakes After a Coil Change

  • Vaping too soon: the wick needs time to soak, even after priming.
  • Starting at high power: on adjustable devices, begin at the low end of the recommended range printed on the coil or box and work up.
  • Loose or overtightened coils: both can cause leaks or a poor connection.
  • Chain vaping a new coil: take a few gentle puffs first so the cotton keeps up.
  • Using the wrong resistance: a coil outside your device’s supported range may not fire or may perform poorly.

If your first puffs still taste harsh, our troubleshooting guide on why a vape tastes burnt with a new coil lists the usual causes and fixes.

Safety and Disposal Tips

Handle e-liquid with care while you work. The NHS advises keeping vapes and e-liquid out of reach of children and pets, because swallowed nicotine can cause poisoning. Wipe up spills, wash your hands afterwards and store spare coils and bottles somewhere secure. The same NHS guidance notes that vapes are classed as electrical waste and should never go in your general bin.

It’s also worth knowing that UK rules limit what your tank can hold. MHRA guidance on GOV.UK says e-cigarette tanks are restricted to a capacity of no more than 2ml, with nicotine e-liquid capped at 20mg/ml and sold in refill containers of up to 10ml. Replacement tanks and glass sold in the UK should reflect that limit.

How to Change a Vape Coil: FAQs

How long should I wait after changing a vape coil?

After priming and refilling, wait around five to ten minutes before your first puff. Thicker, high-VG e-liquids may need a little longer to soak in.

Can I change a coil without emptying the tank?

With some top-coil designs you can, but on most tanks removing the coil opens the bottom of the reservoir, so liquid will pour out. Emptying it first is the cleaner option.

Why is my new coil leaking?

Usually because it isn’t seated or screwed in properly, an O-ring has moved, or the airflow was open while filling. See our guide to why vapes leak for a fuller checklist.

Do all coils fit all tanks?

No. Coils are designed for specific tanks or pod systems, so always match the brand and series to your device. Resistance can vary within a compatible series.

This content is intended for adults aged 18 and over. Most vapes and e-liquids contain nicotine, which is an addictive substance.

Chat on WhatsApp